Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Страница: 52 / 361

OnAir 1000 Digital Mixing Console
5-2 Master Functions
SW V 4.0 Date printed: 23.10.03
ministration table, his name is DEFAULT USER. The access permissions
of this user can be edited. His record cannot, however, be deleted, and no
password can be defined for him.
5.2 AUX and Insert Control
The AUX MASTER/INSERTS page is entered by touching the AUX &
INSERT field on the touch-screen.
If the user has no access permission for the AUX and/or insert parameters,
there will appear a text next to AUX MASTER and/or INSERTS, telling
the user that he cannot modify the parameters.
AUX MASTER: The two rotary encoders below the AUX 1 and AUX 2 gain indication
symbols are used to adjust the desired level of the corresponding AUX
master. The gain can be adjusted in a range of –
∞
to +10 dB; the 0 dB po-
sition is marked with a dash.
ON/OFF selection of the AUX master buses is done by touching the corre-
sponding fields on the screen. A highlighted background indicates the cur-
rent status.
The AUX 1 and AUX 2 gain indication symbols are always displayed,
even if no output unit is jumper-configured for AUX 1 and/or AUX 2.
INSERTS: On the same page, the insert points can be assigned. Assignment is possi-
ble to any of the following signals:
• CH1 to CH10,
• PROGRAM bus,
• RECORD bus,
• Talkback to Studio output,
• Talkback to Control Room (CR) output,
• NONE.
A signal can only be assigned to an insert while the insert is set to OFF, by
touching the channel/bus label field of the insert box. The label field is
highlighted. Then it can be changed with the rightmost rotary encoder. If
the insert is set to ON, the channel/bus label field cannot be highlighted,
and the insert assignment cannot be changed.
The insert send always follows the setting as displayed on the screen; it
remains active while the insert is switched OFF. If the insert is switched
ON, a switchover from the internal connection to the insert return is per-
formed.