Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Страница: 38 / 361

OnAir 1000 Digital Mixing Console
3-4 Operating Concept
SW V 4.0 Date printed: 23.10.03
3.1.4 Monitoring and Talkback Section
[1] Control Room (CR) Monitoring Selector
Ten mutually releasing keys for selecting the control room monitoring
signal from the following sources:
AUX 2/AUX 1: Auxiliary, general purpose outputs;
AUDIT: Auxiliary, general purpose output with configurable inputs;
Σ
REC: Recorder output;
Σ
PGM: Program (on-air) output;
PFL: PFL (pre-fader listening);
EXT 3: External analog input signal;
EXT 2: External analog input signal;
EXT 1: External analog input signal;
OFF AIR: External analog input signal (e.g. tuner for off-air listening).
[2] CR Monitor Speaker Control
MON : Monitoring volume control.
DIM: If pressed, the monitor speaker level is reduced by 20 dB.
The DIM function is activated automatically if one of the TALK BACK
keys is pressed. If “CR DIM WHEN AUDITION SEL” is set in the
COMMON SETTINGS page (details: refer to
chapter 11.2.2 ), the moni-
toring source is AUDIT, and the DJ microphone is on, the AUDIT level is
not muted but reduced by 20 dB.
If DIM is active, the DIM key is illuminated.
CUT: If pressed, the monitor speakers are muted, and the CUT key is illumi-
nated. As long as one of the CR or DJ microphones is on, the monitor
speakers are automatically muted, and the CUT key is illuminated.
AUX 2
AUX 1
AUDIT
ON-AIR CR-MIC STUDIO-MIC
PFL
EXT 3
EXT 2
EXT 1
OFF AIR
F 5
F 4
F 3
F 2
F 1
DIM
CUT
N–1 B
N–1 A
AUX 2
AUX 1
STUDIO
EXT
PFL
PFL
MON
PFL
MON
PFL
MON
REC
PGM
MON PFL / TB TALK BACK PHONES
0
1
2
3
4
9
8
7
6
5
0
1
2
3
4
9
8
7
6
5
0
1
2
3
4
9
8
7
6
5
[1] [6]
[5] [4] [3] [2]
[7]