manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 73

OnAir 1000 Digital Mixing Console

Date printed: 23.10.03 

SW V 4.0

Master Functions  5-23

RESET

START

STOP

5.13.2

 

Fader Stopwatch

The upper one of the two stopwatches is called the fader stopwatch. It
always restarts at 00:00:00 when a new audio channel is activated (e.g.
channel ON, fader open, and output bus selected). In other words, it dis-
plays the elapsed time of the audio channel opened last.
This function can be enabled or disabled for any desired audio channel via
the MIXER SETUP/SYSTEM CONFIG./INPUT menu, item TIMER
START YES/NO.
The counter stops when the audio channel that started the stopwatch is
switched OFF, or its fader is closed.

Note:

If more than one audio channel has caused the fader stopwatch to restart,
only the last audio channel’s time is displayed.

5.13.3

 

User Stopwatch

The user stopwatch is located just below the fader stopwatch. It is con-
trolled by two keys on the console’s surface located below the digits of the
display. One key starts and stops the timer, the other resets the timer.

Key

Label

Description

START

Start timer if stopped

STOP

Stop timer if running

RESET

Reset timer regardless

whether stopped or running

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды