manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 97

OnAir 1000 Digital Mixing Console

Date printed: 23.10.03

SW V 4.0

User Modes  10-5

10.4

 

Administration Functions

By the system administrator, a user record can be created (NEW), changed
(EDIT), or deleted (DELETE).

Create User Record:

To create a new user record, touch NEW in the USER ADMINISTRA-
TION page. The NEW USER page appears with empty input fields:

The USER NAME and PASSWORD fields are filled in, using the key-
board page. The maximum length of the password is 22 characters. The
user name may consist of up to 20 characters. If the new user is not ac-
cepted (e.g. because the user name already exists), an error message tells
the system administrator that the new user will not be registered. A user
name can be entered without a password, too.

Access permission is configured by touching the corresponding function
fields on the NEW USER page. With SET LIKE DEFAULT USER, the
access permission setting and the channel routing of the default user are
copied to the user currently being edited and can subsequently be edited
again. The new user record is stored with SAVE.

Two users are already predefined: The default user and the administrator.
Both can only be edited,

 but not created or deleted.

Change User Record:

A user record is selected by touching the appropriate name field in the
USER ADMINISTRATION page, followed by EDIT. The USER EDIT
page, containing the user's individual data, appears.

The data can be edited in the same way as described above, except that the
user name is displayed but cannot be modified. The only way to rename a
user while preserving his snapshots, mic settings, and channel routings is
to save them to a PC-card, delete the user, create a new one with the de-

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды