manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 201

OnAir 1000 Digital Mixing Console

Date printed: 24.10.03 

SW V4.0

Service Terminal  5-1

5

 

SERVICE TERMINAL

A service terminal connector is provided for servicing the OnAir 1000.

The Service Terminal Task enables the user to bypass the “normal” user
interface and approach the system in a more direct way. This is used in
two specific cases:

Service and Maintenance

(normal user mode)

•

Enable/disable the output of errors, warnings, and information on the
service terminal. (Filter for errors, warnings, and information).

•

System data (current console status, console configuration, etc.) can be
dumped to the service terminal.

•

For integration test use, parts of the system data can be transferred to the
service terminal.

•

Shutdown or reset the console.

Debugging and Testing

(extended user mode, 

for factory tests and experts only

)

There are some software debugging functions that are hidden to the normal
user. In addition to the normal user mode, these functions can also read
and write memory contents, and communicate with other tasks directly
(i.e. not through the command interpreter).

•

System data (current console status, console configuration, etc.) can be
displayed on the service terminal.

•

Any message can be generated and sent to any task in the system.

•

Task message communication can be displayed individually on the service
terminal.

•

Telegrams to any bus can be generated and posted.

•

Telegram flow can be displayed on the service terminal for each bus (in-
put/output, DSP bus...) individually.

•

Telegram polling period can be determined, or telegram polling can be
suppressed by time-out 0.

•

Any memory position can be displayed and written.

•

Any flash-memory position (bit range, section no., address) can be dis-
played and written.

It is important to notice that the service terminal must not be used during
the normal operation of the console.

 Functions and modes activated from

the service terminal can strongly affect the console's performance. Some
debug and test functions can even corrupt the system data and cause a
system crash.

The service terminal command structure is similar to the DOS directory
level structure; if a service terminal command is not finished, the header of
the next command line indicates the level reached. Extended user mode
(i.e. debug) is a level, too, in this context. The command for leaving a level
is similar to the DOS command (“..”).

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды