manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 169

OnAir 1000 Digital Mixing Console

Date printed: 24.10.03

SW V4.0

Features  1-3

Signal processing is based on 24-bit DSPs (Texas Instruments
TMS57070). The input channels are processed by six DSP chips (i.e. two
stereo channels per DSP). The summing bus is a PLD (programmable logic
device) design and can handle up to 32 bit. The resulting sums are further
processed by three additional DSPs.

A serial communication link between the host controller and the DSPs
downloads the algorithms at the startup and sets new parameters during
operation.

1.3

 

Audio Buses

PGM:

Main output bus, stereo or mono, analog and/or digital

REC:

Main output bus, stereo or mono, analog and/or digital

AUX 1:

Auxiliary output, stereo or mono, analog and/or digital

AUX 2:

Auxiliary output, stereo or mono, analog and/or digital

N–1 A:

Clean-feed output, mono, analog and/or digital

N–1 B:

Clean-feed output, mono, analog and/or digital

AUDITION:

Audition output (clean-feed), stereo or mono, analog and/or digital.

Internal buses:

PFL:

Pre-fader listening bus, stereo

TB:

Talkback from control room, talkback from studio.

1.4

 

Host Controller

The host controller is a Motorola MC68360 running at 25 MHz. The tasks
performed by the controller are:

• SW download to the DSPs
• SW download to the graphics controller
• Communication with the user surface
• Communication with DSPs
• Communication with modules
• Logic functions
• Graphics
• System test and error handling
• Flash EPROM handling

The software is based on a VRTX real-time operating system. VRTX was
originally designed for industrial applications and is very reliable. The
complete application is written in the “C” programming language.

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды