manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 112

OnAir 1000 Digital Mixing Console

11-12  Configuration

SW V 4.0

Date printed: 23.10.03

If the console is synchronized to an external signal, a message box is dis-
played if synchronization is lost; a “Missing External Clock” warning is
added to the error list.
If the console was synchronized to either WORDCLOCK or AES/EBU
and a “no sync” condition is detected, the console automatically selects the
INTERNAL mode; however, the external clock selection in the SYSTEM
SYNC  page is not changed. As soon as a valid external clock signal is
available, the console will be re-synchronized.
If synchronization to a video source is lost, only a message box is dis-
played. The sync source remains in VIDEO mode.

If the Clock Sync interface is removed, sync source selection changes to
INTERNAL mode, and no other sync source can be selected.

11.2.10

 

Automation

More information on this subject can be found in 

chapter 9

.

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды