Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Страница: 136 / 361

OnAir 1000 Digital Mixing Console
14-8 Wiring and Hardware
SW V 4.0 Date printed: 23.10.03
14.4 Analog Line Input
Each analog line input unit has an input selector for two stereo input
sources (A and B). Both inputs A and B are electronically balanced and are
equivalent.
Pin Assignments: LINE inputs A/B (XLR, 3pin, female):
Pin Signal
1 Chassis
2 Input +
3 Input –
CTRL connector (D-type, 9pin, male): Please refer to chapter 14.3 for
details.
14.5 Digital Input
Each digital input unit has an input selector for two digital signals A and
B. Each of the inputs has all connectors (XLR, Cinch/RCA, TOSlink) re-
quired for supporting the AES/EBU and S/PDIF standards.
The most important C-bits (Professional, Audio, Emphasis, Sampling rate,
Stereo) are read on the interface and transferred to the host controller.
Audio and Emphasis bits are processed. The digital source needs not to be
synchronized to the console since all digital input channels are equipped
with a 20-bit sampling frequency converter (SFC).
Pin Assignments: AES/EBU inputs A/B (3pin, female):
Pin Signal
1 Chassis
2 Input +
3 Input –
S/PDIF connectors A/B (Cinch/RCA):
Pin Signal
Inner Input
Outer GND
Optical connectors A/B (TOSlink): For optical-fibre cables.
CTRL connector (D-type, 9pin, male): Please refer to chapter 14.3 for details.
3
1
2
3
1
2