manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 9

Conformity

VII

G

Declarations of Conformity

G1

Class A Equipment - FCC Notice

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide a reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own
expense.

Caution:

Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment. Also refer to rele-
vant information in this manual.

G2

CE Declaration of Conformity

We,

Studer Professional Audio G

mbH

,

CH-8105 Regensdorf,

declare under our sole responsibility that the product

Studer OnAir 1000, Digital Mixing Console,
(starting with serial no. 1000)

to which this declaration relates, according to following regulations of EU
directives and amendments
• Low Voltage (LVD):

73/23/EEC + 93/68/EEC

• Electromagnetic Compatibility (EMC):

89/336/EEC + 92/31/EEC + 93/68/EEC

is in conformity with the following standards or normative documents:
• Safety:

EN 60950:2000 (Class I equipment)

• Safety of laser products:

EN 60825-1:1994 + A11 + A2, EN60825-2:2000

• EMC:

EN 55103-1/-2:1996, electromagnetic environments E2 and E4.

Regensdorf, December 18, 2000

B. Hochstrasser, President

P. Fiala, Manager QA

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды