manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 125

OnAir 1000 Digital Mixing Console

Date printed: 23.10.03

SW V 4.0

Diagnostics  13-7

13.3

 

System Test

The system test can be activated by touching the SYSTEM TEST field on
the SYSTEM CONFIG. page. The SYSTEM TEST selection page appears
on the touch-screen:

13.3.1

 

Buttons/Faders Test

Selecting the  BUTTONS/FADERS  test brings the console into a mode
where the controls of the console can be checked. To return to the SYS-
TEM TEST selection page, the EXIT field has to be touched.

Keys and Lamps Test:

If one of the keys OFF, ON, PFL, SEL, EQ, A, or B is pressed, it is illumi-
nated. To check the LEDs next to the fader and the OVL LED, move the
fader knob from its lowest position up to the highest position. All LEDs
will be on consecutively.

Touch-Screen Test:

If a field is touched on the touch-screen, it is highlighted.

Rotary Encoders Test:

If a rotary encoder is turned clockwise,  the bar graph next to it encoder
increases. The three narrow bar graphs in the right-hand part of the screen
are used for the MON, PFL/TB, and PHONES knobs. The full length of
the bar graph corresponds to a complete turn of the rotary encoder.

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды