manualshive.com logo in svg

Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Studer SW V4.0 OnAir 1000 Скачать руководство пользователя страница 44

OnAir 1000 Digital Mixing Console

4-2  Channel Functions

SW V 4.0

Date printed: 23.10.03

 

EQ Key:

The EQ key opens the EQ/filter page

 

on the touch-screen, and the corre-

sponding SEL key is illuminated, indicating that parameters of this input
channel are displayed.

 

The EQ key is illuminated if the equalizer is on.
By observing if the EQ keys are illuminated, it can be determined at a
glance in which input channels the equalizer settings are active.

4.2

 

Faders

 

Since the audio path is fully digital, the signal does not pass through the
faders. Therefore, linear-track mono faders are used. The stroke length is
100 mm. When opening the fader, fader start or signaling commands can
be released, depending on the configuration (refer to 

chapter 8

).

 

Master Faders:

On the right-hand side of the input channel faders, a master fader for each
the program and the record output is provided (refer to 

chapter 5.14

).

These two master faders can be enabled or disabled at the user’s conven-
ience.

4.3

 

LED Indicators

 

In each fader strip, LEDs display the actual routing of the signals. The
selected physical input being (either A or B) is indicated by the illumi-
nated A or B selector key, and the filtering of the signal by the equalizer
function is indicated by the illuminated EQ key.

 

With all these displays, the operator has an immediate overview of the
major console settings at a single glance.

 
 

Channel Label Display:

The four-character channel label display shows the name of the selected
physical input. The channel label is entered in the Mixer Setup menu of
the INPUT CONFIG. page, using a soft keyboard appearing on the touch-
screen.

 
 

OVL (Overload):

A red OVL indicator per fader strip signalizes an overload condition any-
where within the corresponding input channel’s signal processing path.

 

Signals in the OnAir 1000 are processed with sufficient digital headroom
through the entire signal processing chain. Besides, most outputs (PGM,
REC, AUX1, AUX2, INSERT SEND1/2) are equipped with limiters in or-
der to prevent overloads. All limiters are set to 0 dB

FS

 with fixed attack

and release times.

 

Overload in an input channel is indicated if the signal level reaches 0 dB

FS

.

Due to the output limiters, normally distortions will be avoided even in
case of an overload.

 
 

PGM / REC:

The PGM and/or REC LEDs are on if the respective input channel's signal
is routed to the PGM and/or the REC output(s). The output routing can be
changed in the Channel Control page on the touch-screen that is opened by
pressing the SEL key. The “

Σ

PROGRAM” and/or “

Σ

RECORD” touch-

screen fields are highlighted if selected.

 
 

AUX1 / AUX2:

The AUX1 and AUX2 LEDs are on if the respective input channel's signal
is routed to the AUX output(s). The AUX settings can be changed in the
Channel Control page on the touch-screen that is opened by pressing the
SEL key. There, both auxiliaries can be independently set as “AF” (after-

EQ

OVL

PGM

REC

AUX1

AUX2

Содержание SW V4.0 OnAir 1000










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды