Wing Construction Cont.
☐
On both
left
and
right
of wing center fit and
bond tip rib W29 to the ends of the spars.
☐
On both
left
and
right
of wing center bond
W30 between ribs ensuring that arrows point
up and toward the front spar.
The rear spar
tapers up slightly between ribs W17 and W29.
Ensure rear portion of diagonal is flush with
the bottom of rib W29.
☐
Fit sub spar W31 to slot in rib W14, and tabs
at the rear of ribs W15, W16, W17, W27,
W28, and W29. Repeat for opposite side.
☐
Assemble W32 wing tips by bonding W32a to
W32b. Make two W32 wing tips.
☐
Fit W32 wing tips to slots in
left
and
right
rib
W29, aligning outer edge with the tip of sub
spar W31.
☐ ☐
Fit an 24 in. length of 1/4 in. balsa dowel
to leading edge of ribs. Align one end
flush with rib W7.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 22
W30
W17
W29
W29
W31
W14
W32a
W32b
W32
W29
W31
Balsa
Dowel
W7
