Finishing Cont.
☐
Install a strip of 3/4 in. adhesive backed
Velcro to the bottom of F0, between the motor
mount F21 and former F2.
☐
Install another length of Velcro inside the
bottom of the fuselage, just behind F2.
☐
Secure the motor using four #2 x 1/4 in.
screws. Place one #4 nylon flat washer
between the motor “X” mount and ply firewall
on
left
side of motor to set proper right thrust.
☐
Connect the ESC to the motor and check for
proper direction of motor rotation.
☐
Slide the ESC through the hole in former F1,
just below the motor mount assembly.
☐
Install the receiver on the Velcro patch on the
inside bottom of fuselage and connect the
servo and ESC leads.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 46
`
Velcro
F21
F2
Velcro
Top View
F1
Top View
Washer
Washer
