Finishing Cont.
☐
Dummy Motor:
Gather M1 through M8,
manifold parts M9, M10, and two 1/8 in. x 2
in. dowels (M8 not shown... why? beats me.)
☐
Stack parts M1 through M7, from the bottom
up, on the two dowels. Ensure parts are
aligned with the score mark etched on one
edge (see picture above right) all on the same
side.
☐
Put a few drops of medium CA between the
layers and press together, ensuring the
assembly is square before the glue cures.
☐
Position the top of the motor M8, again with
the score mark on the edge aligned with the
marks on the other layers, and bond with thin
CA.
☐
Paint motor the desired color with a light coat
of lacquer based spray.
☐
Assemble the manifold from M9 and M10
parts shown here, and bond with thin CA.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 50
Score Mark
M9
M10
M1 M2 M3 M4 M5
M6 M7
M9
M10
M1
M2
M3
M4
M5
M6
M7
M8
