Fuselage Cont.
☐
Align and bond H3 in position where indicated
on H1.
☐
Align and bond H4 in position where indicated
on H1.
☐
Check and re-check the polarity of the
magnet in the hatch catch. Orient the second
magnet within H4 so that it will attract the
magnet in catch. Check the polarity again
then bond magnet in place with medium CA.
☐
Fit hatch into fuselage, and give the fuselage
a final sanding prior to covering.
☐
Pushrod Housing:
Elevator - Insert one 18”
length of the yellow tubing into the forward
slot on the
left
, rear side of the fuselage.
☐
The tubing will cross over to the other side of
the fuselage when it passes through former
F15. Continue to pass the tubing through the
hole on the
right
side of each former.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 33
H3
H1
H1
H4
H4
Bottom View
Top View
Left Side
F15
