Steca coolcept StecaGrid 1500, Инструкция по установке и эксплуатации

Страница: 69 / 94

8 Maintenance and disposal
8.1 Maintenance
The inverter is virtually maintenance-free. Nevertheless, we
recommend that you inspect it regularly to ensure that the cooling
fins on the front and rear of the device are free of dust. Clean the
device as needed, as described below.
NOTICE!
Danger of destroying components on devices of type
coolcept:
– Ensure that cleaning agents and cleaning
materials do not get between the cooling fins on
the front of the inverter (under the grey hood).
– The following cleaning materials, in particular,
must not be used:
–
Cleaning agents that contain solvent
– Disinfectants
– Gritty or sharp-edged cleaning materials
Dust should be removed using compressed air (max. 2 bar).
DANGER!
Risk of death by electrocution! Use cleaning agents
only with a slightly damp cloth.
1. Remove heavy soiling with a slightly damp cloth (use clear
water). If necessary, use a 2 % hard soap solution instead of
water.
2. After cleaning, remove any soap residue using a slightly damp
cloth.
8.2 Disposal
Do not dispose of the device in the household waste. After the
service life of the device has elapsed, send the device with the
notification For disposal .
The device packaging consists of recyclable materials.
Removing dust
Removing heavy soiling
EN
747,431 | Z09.2 | 18/02/2016 69