Steca coolcept StecaGrid 1500, Инструкция по установке и эксплуатации, Страница: 52 / 94

3. Press
SET
.
ð
The change is adopted (value no longer flashes) or
4. Press
ESC
to cancel the change (value no longer flashes).
5.
Press s .
ð
The next value is selected.
6.
Repeat steps 1 to 4 for the remaining values.
7. Press
ESC
.
✓
The next higher menu level is displayed.
NOTICE!
Risk of yield losses and contravention of regulations
and standards. Inverter and grid parameters can be
changed in the service menu. The service menu must
therefore only be used by technical professionals who
know the applicable regulations and standards.
1. Select the
Service
menu item.
2. Press
SET
.
ð
The fig. shown at the left appears.
3. Press rs simultaneously for 3 seconds.
ð
The service menu is displayed (Fig. left).
4. Press
rs
to select a menu item.
5. Press
SET
to edit the menu item. The following applies:
n
Enter the password if required (Fig. left); see
Ä
Chapter
3.3.4 ‘Service menu’ on page 19.
n
If necessary, press
rs
within a menu item to display
and edit other settings (e.g.
Voltage limits
).
n
The menu items are described in
Ä
Chapter 3.3.4
‘Service menu’ on page 19.
Calling up the service
menu and editing the
values
EN
747,431 | Z09.2 | 18/02/2016 52