Steca coolcept StecaGrid 1500, Инструкция по установке и эксплуатации

Страница: 64 / 94

1. Select
Event log
in the main menu.
2. Press
SET
.
ð
The event messages are displayed in chronological order
(latest message first).
3. Press
rs
to page through the event messages.
Event message Description Type
Boost converter defective
The boost converter is defective, the inverter is not
injecting into the grid or is injecting at reduced
power.
u Notify your installer.
Boost converter has wrong
HW version
The inverter cannot identify an internal component,
or it does not match the other components. The
inverter cannot inject into the grid.
u Notify your installer.
Boost converter
malfunction
An internal component of the inverter is defective.
It is possible that the inverter injects into the grid
not at all, or with reduced capacity.
u
Notify your installer.
Boost converter not
connected
The connection of the internal components is
interrupted. The inverter is not injecting into the
grid.
u Notify your installer.
Boost converter not
recognised
u
Notify your installer.
CountryCode failed
There is an inconsistency between the selected
country setting and the country setting stored in
memory.
u Notify your installer.
Country parameters
invalid
The inverter cannot inject into the grid because it
has no valid parameters.
u Notify your installer.
Device overheated
In spite of capacity reduction, the maximum
permissible temperature is exceeded. The inverter
does not inject into the grid until the permissible
temperature range is reached.
1. Check whether the installation conditions are
fulfilled.
2. Contact your installer if this alarm occurs
frequently.
Displaying event
messages
Event messages
EN
747,431 | Z09.2 | 18/02/2016 64