STATUS SCIENTIFIC CONTROLS
Installation, Commissioning & Routine Gas Testing
FGD10A-M Gas Detector
TD18/032
Issue:
10
Change Note:
1869
Page 59
9.1.23. Screen Saver
The screen saver has two parameters, Enabled and Time.
The Enabled setting can be either Yes or No, selecting No disables the
screen saver function.
The time setting can be between 1 and 10. This is the time that the screen
saver will be active. The normal display will always be 1 minute.
This menu is used to display the units of parameter measured by the sensor.
•
From the menu system select menu option:
Screen Saver
and
press ENTER. The following screen will be displayed:
Screen Saver
Edit
Enabled Time(min)
Yes
10
•
Use the
button to select Enabled or Time then use the
button to change the readings, continue for all digits until the
desired date / time is set.
•
Press ENTER to accept the new settings,
will be
displayed, this will synchronise the time to the selected seconds.
Note: Pressing MENU instead of ENTER leaves the settings
unchanged.
•
Press the MENU button to exit the sensor type option menu.
On exit the display will show i
f no changes have
been made or if changes have been made.
No change
Data updated
Updated
