STATUS SCIENTIFIC CONTROLS
Installation, Commissioning & Routine Gas Testing
FGD10A-M Gas Detector
TD18/032
Issue:
10
Change Note:
1869
Page 39
9.1.11. Set Password
Use this menu option to set the user password. The password can only be
digits 1, 2 or 3, with a maximum of 6 digits.
Place the FGD10A-M in the password menu as follows:
•
Press the MENU to open the menu system.
•
Using the NEXT and PREVIOUS buttons, select menu option:
Set Password
•
Press ENTER. The display shows
Password
Edit
•
Press the 1, 2 or 3 buttons to set the desired password.
•
Press MENU to exit the edit window. The display shows:
Password
Exit
123
•
Press ENTER to store the changes.
Note 1: Pressing MENU instead of ENTER leaves the unit
without change.
Note 2: Pressing ENTER when the password is blank will
result in the password being 0 and as such that the
user can effectively by-pass the password
mechanism. The display will show:
Password
Exit
Not Set
•
Press the MENU button to exit the set password option menu.
On exit the display will show if no changes have
been made or if changes have been made.
No change
Data updated
