STATUS SCIENTIFIC CONTROLS
Installation, Commissioning & Routine Gas Testing
FGD10A-M Gas Detector
TD18/032
Issue:
10
Change Note:
1869
Page 17
6.2.
Screen Saver
The OLED display can shown signs of display retention when areas of the screen are
constantly illuminated. These effects reveal them selves when the background is a
colour other than black.
The screen defaults to a screen saver mode where the display alternates between the
display logo and the actual gas readings, as seen below:
L OGO
0
The logo and the gas readings alternate and appear at random positions on the
screen.
The screen normally will display the normal screen for 1 minute then will show the
screen saver for between 1 and 10 minutes.
The screen saver mode can be set up using the menu options as described later
The screen saver is deactivated for the following conditions
1)
During alarm conditions
2)
During a fault condition
3)
On a key press, resets the normal display to 1 minute
4)
During the menu options
