STARPLUS STSe Key System, Руководство по установке

Страница: 46 / 94

3-18 Expansion Board Installation
Chapter 3 - Installation
STARPLUS STSe - Installation Manual August 2005
Functionality Description
†
Automatic Number Identification (ANI) information from the carrier is treated exactly
the same as an inbound ICLID (Caller ID) number. Calls can be routed, placed in the
Unanswered Call Table, sent out to the CTI Module port on a keyset, and run through the
Number To Name Translation Table. The
STSe system provides call progress tones in the
same manner as ICLID.
†
Dialed Number Identification Service (DNIS) information from the carrier is treated
using DID line rules. DNIS calls are routed based on the DID Routing Table.
†
ANI/DNIS is a combined format, where the system waits for the ANI/DNIS information
from the carrier. When it is received, the system routes the call using ICLID processing. If
this information is not found in the ICLID Route Tables, the DNIS information is compared
to the DID table for a match. The call is then routed based on the DID tables. If a match is
not found on either the ANI or DNIS number, the call is routed based on normal CO line
operation (CO Ringing Assignments).
The following table summarizes the operation of the system.
Table 3-4: Call Routing Criteria
ANI DNIS Operation
N N Calls routed based on normal CO operation (CO Ring Assignments.
N Y Calls routed based on DID tables with DID operation.
Y N Calls routed based on ICLID routing and ICLID operation.
Y* Y Calls routed on ICLID first, if no route is found, the DNIS digits are
compared to the DID table. If no route is found in the DID table the call
is routed based on CO line Ringing Assignments.
*If both ANI and DNIS calls are routed -- the following table summarizes what is displayed at the phone.
The T1 card accepts ANI/DNIS information in a DTMF format only. Some carriers do not
provide ANI or ANI/DNIS in a DTMF format. Consult your local carrier for available
options.
Table 3-5: Call Routing Display Format
Route Found Type of Display Format
ICLID ICLID ANI number placed in the 14-character number field, the
DNIS number followed by the name programmed in ICLID
translation table placed in the 24-character name field.
DID ICLID ANI number placed in 14-character number field. DNIS
number followed by programmed name from the DID
tables in 24-character name field.
NONE ICLID ANI number placed in 14-character number field and the
DNIS number is placed in the 24-character name field.
Table 3-6: Telco to T1IB Interconnect Diagram - Pin Connections
Telco T1IB
RJ45 RJ45
1--> <--1
2--> <--2
4--> <-- 4
5--> <--5