STARPLUS STSe Key System, Руководство по установке

Страница: 81 / 94

Remote Maintenance 4-13
Chapter 4 - Maintenance and Troubleshooting
STARPLUS STSe - Installation Manual August 2005
Event Trace Buffer
The Event Trace Buffer is used to store and dump event traces (up to 30) that occur just prior
to an
STSe system soft or hard restart. The data can then be reviewed by authorized personnel
to aid in system troubleshooting.
The basic format for the system commands are as follows:
s
Table 4-7: Event Trace Buffer Command
Command Function
t<space><return> Displays the current status of the Event Trace Buffer.
t<space>0<return> Turns the Trace buffer OFF.
t<space>1<return> Turns the Trace buffer ON to record events prior to a
soft system reset.
t<space>2<return> Turns the Trace buffer ON to record events prior to a
hard system restart.
t<space>3<return> Turns the Trace buffer ON to record events prior to
either a soft reset or a hard system restart.
d<space>e<return> Dumps Trace Events stored from last system reset
(soft or hard).
d<space>b<return> Permits maintenance personnel to determine the
busy status of all the busy keysets and CO Lines in
the system, including the T1 lines.
r<space>sXXX<return> Permits a specific station to be reset.
r<space>cXXX<return> Permits a specific CO Line to be reset.
Press the <ESC> key to abort the Data Dump and return to the maint> prompt.