STARPLUS STSe Key System, Руководство по установке

Страница: 62 / 94

3-34 Station/CO Wiring
Chapter 3 - Installation
STARPLUS STSe - Installation Manual August 2005
Computer Telephone Integration Module
The Computer Telephone Integration (CTI) module is used to connect the telephone system
and a personal computer to facilitate the use of computer-based telephone applications such
as
Discovery Desktop and Discovery Link.
The following illustrations show the appropriate connections for installing the CTI module.
CTI Installation Procedure (24-Button Phones PN: 3515):
1. Connect the 2-wire line cord from the extension block of the KSU to the plug labeled
“ADP” on the base of the key telephone unit (KTU).
2. Connect the 6-wire line cord from the right plug on the base of the KTU to the plug
labeled “KTU” on the CTI module.
3. Connect the 9-pin 3-wire straight-through serial cable from the CTI module to a COM port
on the personal computer.
CTI Installation Procedure (Phones PN: 3011, 3012, 3015, 3016, & 3017):
1. Connect the 2-wire line cord from the extension block of the KSU to the plug labeled
“KSU” on the CTI module.
2. Connect the 6-wire line cord from the plug labeled “KTU” on the CTI module to the plug
on the base of the KTU.
3. Connect the 9-pin 3-wire straight-through serial cable from the CTI module to a COM port
on the personal computer.
KSU
KTU
KSU
CTI MODULE
2-wire
6-wire
3-wire
24-Button Phones with PN: 3515
KSU
KTU
KSU
CTI MODULE
2-wire
6-wire
3-wire
Phones with PN: 3011, 3012, 3015, 3016, & 3017