Stanley 73482, Инструкция по эксплуатации и обслуживанию

Страница: 2 / 248

©2019 STANLEY Black & Decker
All rights reserved.
The information provided may not be reproduced and/or made public in any way and through any means (electronically
or mechanically) without prior explicit and written permission from STANLEY Engineered Fastening. The information
provided is based on the data known at the moment of the introduction of this product. STANLEY Engineered Fastening
pursues a policy of continuous product improvement and therefore the products may be subject to change. The information
provided is applicable to the product as delivered by STANLEY Engineered Fastening. Therefore, STANLEY Engineered
Fastening cannot be held liable for any damage resulting from deviations from the original specifi cations of the product.
The information available has been composed with the utmost care. However, STANLEY Engineered Fastening will not
accept any liability with respect to any faults in the information nor for the consequences thereof. STANLEY Engineered
Fastening will not accept any liability for damage resulting from activities carried out by third parties. The working names,
trade names, registered trademarks, etc. used by STANLEY Engineered Fastening should not be considered as being free,
pursuant to the legislation with respect to the protection of trade marks.
CONTENT
1. SAFETY DEFINITIONS 3
1.1 GENERAL SAFETY RULES 3
1.2 PROJECTILE HAZARDS 3
1.3 OPERATING HAZARDS 4
1.4 REPETITIVE MOTIONS HAZARDS 4
1.5 ACCESSORY HAZARDS 4
1.6 WORKPLACE HAZARDS 4
1.7 NOISE HAZARDS 4
1.8 VIBRATION HAZARDS 5
1.9 ADDITIONAL SAFETY INSTRUCTIONS FOR HYDRAULIC POWER TOOLS 5
2. SPECIFICATIONS 6
2.1 TOOL SPECIFICATION 6
2.2 TOOL DIMENSIONS 7
2.3 PLACING CAPABILITY 7
2.4 PACKAGE CONTENTS 7
2.5 COMPONENT LIST 8
2.6 EXPLODED GENERAL ASSEMBLY 9
2.7 GENERAL ASSEMBLY 10
3. PUTTING IN SERVICE 11
3.1 PRINCIPLE OF OPERATION 11
3.2 PREPARATION FOR USE 11
4. OPERATING INSTRUCTIONS 12
4.1 TO INSTALL AN AVBOLT® FASTENER 12
4.2 TO INSTALL AN AVDELOK® FASTENER 12
4.3 TO INSTALL AN NEOBOLT® FASTENER 13
5. SERVICING THE TOOL 13
5.1 DAILY SERVICING 13
5.2 WEEKLY SERVICING 13
5.3 ANNUAL SERVICING / EVERY 250K OPERATIONS 13
5.4 SERVICE KIT 14
5.5 SERVICING TOOLS 14
5.6 HYDRAULIC OIL 14
5.7 DISMANTLING INSTRUCTIONS 14
5.8 PROTECTING THE ENVIRONMENT 16
6. SAFETY DATA 17
6.1 ENERPAC® HF HYDRAULIC OIL - SAFETY DATA 17
6.2 MOLYLITHIUM GREASE EP 3753 - SAFETY DATA 17
6.3 MOLYKOTE® 111 GREASE - SAFETY DATA 17
7. FAULT DIAGNOSIS 18
8. DECLARATION OF CONFORMITY 20
9. PROTECT YOUR INVESTMENT! 21
2
E N G L I S H O R I G I N A L I N S T R U C T I O N