SSINVERTER SSI700, Руководство пользователя, Страница: 58 / 148

SSI700 User Manual Function Code
www.ssinverter.info
Property
Default Setting Range Parameter Name
Function
Code
Group 9: Fault and Protection
☆ 00000
Unit's digit (Too large speed
deviation)
Fault protection action
selection 4
P9-50
Same as unit's digit in P9-47
Ten's digit (Motor over-speed)
Same as unit's digit in P9-47
Hundred's digit (Initial position
fault)
Same as unit's digit in P9-47
Thousand's digit (Speed
feedback fault)
Same as unit's digit in P9-47
Ten thousand's digit: Reserved
☆
0
0: Current running frequency
1: Set frequency
2: Frequency upper limit
3: Frequency lower limit
4: Backup frequency upon
abnormality
Frequency selection for
continuing to run upon
fault
P9-54
☆
100.0
%
0.0%–100.0% (maximum
frequency) Backup frequency upon
abnormality
P9-55
☆ 0
0: Invalid
1: Decelerate
2: Decelerate to stop Action selection at
instantaneous power
failure
P9-59
☆ 90.0% 80.0%–100.0%
Action pause judging
voltage at
instantaneous power
failure
P9-60
☆ 0.50s 0.00–100.00s
Voltage rally judging
time at instantaneous
power failure
P9-61
☆
80.0%
60.0%–100.0% (standard bus
voltage)
Action judging voltage
at instantaneous power
failure
P9-62
☆
0
0: Disabled
1: Enabled Protection upon load
becoming 0
P9-63
☆ 10.0%
0.0%–100.0% (rated motor
current) Detection level of load
becoming 0
P9-64
☆
1.0s 0 0.0–60.0s
Detection time of load
becoming
P9-65
Property
Default Setting Range Parameter Name
Function
Code
Group 10: Process Control PID Function
☆ 0
0: 10-01
1: AI1
2: AI2
3: reserved
4: Pulse setting (DI5)
5: Communication setting
6: Multi-reference
PID setting source 10-00
☆
50.0% 0.0%–100.0% PID digital setting 10-01