SSINVERTER SSI700, Руководство пользователя, Страница: 101 / 148

SSI700 User Manual Description of Function Codes
www.ssinverter.info
Group F8: Auxiliary Functions
Property
Default Setting Range Parameter Name
Function
Code
☆
2.00 Hz 0.00 Hz to maximum frequency JOG running frequency P8-00
☆ 20.0s 0.0–6500.0s JOG acceleration time P8-01
☆
20.0s 0.0–6500.0s JOG deceleration time P8-02
These parameters are used to define the set frequency and acceleration/deceleration time
of the AC drive when jogging. The startup mode is "Direct start" (P6-00 = 0) and the stop
mode is "Decelerate to stop" (P6-10 = 0) during jogging.
Property
Default Setting Range Parameter Name
Function
Code
Group P8: Auxiliary Functions
☆
Model
dependent
0.0–6500.0s Acceleration time 2 P8-03
☆
0.0–6500.0s Deceleration time 2 P8-04
☆
0.0–6500.0s Acceleration time 3 P8-05
☆ 0.0–6500.0s Deceleration time 3 P8-06
☆
0.0–6500.0s Acceleration time 4 P8-07
☆
0.0–6500.0s Deceleration time 4 P8-08
The SSI700 provides a total of four groups of acceleration/deceleration time, that is, the
preceding three groups and the group defined by P0-17 and P0-18. Definitions of four
groups are completely the same. You can switch over between the four groups of
acceleration/deceleration time through different state combinations of DI terminals. For
more details, see the descriptions of P4-01 to P4-05.
Default Setting Range Parameter Name
Function
Code
0.00Hz 0.00 Hz to maximum frequency Jump frequency 1 P8-09
0.00Hz 0.00 Hz to maximum frequency Jump frequency 2 P8-10
0.00Hz 0.00 Hz to maximum frequency Frequency jump amplitude P8-11
If the set frequency is within the frequency jump range, the actual running frequency is the
jump frequency close to the set frequency. Setting the jump frequency helps to avoid the
mechanical resonance point of the load.
The SSI700 supports two jump frequencies. If both are set to 0, the frequency jump
function is disabled. The principle of the jump frequencies and jump amplitude is shown in
the following figure.
Figure 6-15 Principle of the jump frequencies and jump amplitude