SSINVERTER SSI700, Руководство пользователя, Страница: 50 / 148

SSI700 User Manual Function Code
www.ssinverter.info
Property
Default Setting Range Parameter Name
Function
Code
Group P5: Output Terminals
- -
24: Accumulative power-on time
reached
25: Frequency level detection
BRAKE control 2 output
26: Frequency 1 reached
27: Frequency 2 reached
28: Current 1 reached
29: Current 2 reached
30: Timing reached
31: AI1 input limit exceeded
32: Load becoming 0 (Drop in)
33: Reverse running
34: Zero current state
35: Module temperature reached
36: Software current limit
exceeded
37: Frequency lower limit
reached (having output at stop)
38: Alarm output
39: Motor overheat warning
40: Current running time
reached
Reserved P5-05
☆
0
0: Running frequency
1: Set frequency
2: Output current
3: Output torque (absolute value)
4: Output power
5: Output voltage
6: Pulse input
7: AI1
8: AI2
9: Reserved
10: Length
11: Count value
12: Communication setting
13: Motor rotational speed
14: Output current
15: Output voltage
16: Reserved
FMP function selection P5-06
☆ 0 AO1 function selection P5-07
-
- Reserved P5-08
☆
50.00
kHz
0.01–100.00 kHz
Maximum FMP output
frequency
P5-09
☆
0.0% -100.0%–100.0% AO1 offset coefficient P5-10
☆ 1.00
-10.00–10.00
AO1 gain P5-11
☆
0.0s
0.0–3600.0s
FMR output delay time P5-17
☆ 0.0s 0.0–3600.0s
Relay1 output delay
time
P5-18
☆ 0.0s
0.0–3600.0s
DO1 output delay time P5-20
☆ 00000
Unit's digit (FMR valid mode)
DO valid mode selection
P5-22
0: Positive logic
1: Negative logic
Ten's digit (Relay valid mode)
0, 1 (same as FMR)
Thousand's digit (DO1 valid
mode)
0, 1 (same as FMR)