SSINVERTER SSI700, Руководство пользователя, Страница: 100 / 148

SSI700 User Manual Description of Function Codes
www.ssinverter.info
Property
Default Setting Range Parameter Name
Function
Code
Group P7: Operation Panel and Display
●
-- 0–65535 h
Accumulative running
time
P7-09
It is used to display the accumulative running time of the AC drive. After the accumulative
running time reaches the value set in P8-17, the terminal with the digital output function
12 becomes ON.
Property
Default Setting Range Parameter Name
Function
Code
Group P7: Operation Panel and Display
● -- -- Product number P7-10
● -- -- Software version P7-11
☆
1
0: 0 decimal place
1: 1 decimal place
2: 2 decimal places
3: 3 decimal places
Number of decimal
places for load speed
display
P7-12
P7-12 is used to set the number of decimal places for load speed display. The following
gives an example to explain how to calculate the load speed:
Assume that P7-06 (Load speed display coefficient) is 2.000 and P7-12 is 2 (2 decimal
places). When the running frequency of the AC drive is 40.00 Hz, the load speed is
40.00x 2.000 = 80.00 (display of 2 decimal places).
If the AC drive is in the stop state, the load speed is the speed corresponding to the set
frequency, namely, "set load speed". If the set frequency is 50.00 Hz, the load speed in
the stop state is 50.00 x 2.000 = 100.00 (display of 2 decimal places).
Property
Default Setting Range Parameter Name
Function
Code
Group P7: Operation Panel and Display
●
0 h 0–65535 h
Accumulative power-on
time
P7-13
It is used to display the accumulative power-on time of the AC drive since the delivery. If
the time reaches the set power-on time (P8-17), the terminal with the digital output
function 24 becomes ON.
Property
Default Setting Range Parameter Name
Function
Code
Group P7: Operation Panel and Display
●
-- 0–65535 kWh
Accumulative power
consumption
P7-14
It is used to display the accumulative power consumption of the AC drive until now.