91
Appendix D. RXT Management
Options
This appendix contains the following information about other methods you can use to
take advantage of the RXT350:
•
Using the Digital Display
, below
•
Interpreting RXT Flash Codes
on page 95
Using the Digital
Display
You can use the digital display to
complete a variety of RXT350 and RXT
media tasks, and to identify the RXT350’s
IP address.
Return to Default State or Clear the Menu
To clear the menu at any time, press and hold the Select
and
Load/Unload
buttons for approximately one second. Unless there is an error, the drive will
be in ready mode, with the display blank and the blue LED flashing.
Change Display State or Switch Tasks
To change to a specific task, switch to the task’s state by pressing Select, then
pressing the Load/Unload button. Tasks, or states, are indicated by an initial
letter. When a letter displays, you can execute that task.
Select the Task or Displayed State
Press and release the Select button to continue with the task indicated by the
current state.
Digital
Display
Select
Load/
Unload
Figure 10-3
The front panel.
