manualshive.com logo in svg

Spectra Logic Spectra RXT350, Руководство пользователя

Поделиться
Скачать
Spectra Logic Spectra RXT350 Скачать руководство пользователя страница 79

Appendix A.  Specifications

79

RXT350 Power Requirements

Source

Requirements

Power Cable

The power cable included with RXT350 is a standard, three conductor, 18 AWG power 
cord safe for 120-volt use in the United States and Canada. The cable has a molded 
NEMA 5-15P male connector to plug in the wall and a molded IEC 60320-type female 
connector to plug in the RXT350 unit.

Note:

To use the RXT350 outside of North America, the power cord 
must meet the specifications for that country.

220 Volt-AC Power Cord for Use in North America

The criteria for a 220-volt AC power cord for the RXT350 are as follows:

• Power cord must have a molded NEMA 6-15P attachment plug on one end.

• Power cord must have a molded IEC 60320-type female connector to connect to the 

RXT350.

• Cordage must be SJT type, three-conductor, 18 AWG minimum.

• Power cord must comply with local electrical code.

220 Volt-AC Power Cord for International Use

The criteria for an international 220-volt AC power cord are as follows:

• Power cord must have an attachment plug of the proper type, rating, and safety 

approval for the intended country.

• Power cord must have a molded IEC 60320-type female connector to connect to the 

RXT350.

• Cord must be a flexible, HAR (harmonized) type H05VV-F, three conductor, cord 

with minimum conductor size of 0.03 square inches (1.0 square millimeter).

Input Voltage

100/240 VAC

Input Power

100 watts typical, 450 watts peak

Current

4.5 - 2.0 Amps

Input Frequency

50/60 Hz

Fuse rating

2 Amps, 250 Volts

Содержание Spectra RXT350



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды