Chapter 5 Function parameter
31
Ch
ap
ter 5
21.
d0.21
Linear speed
Show the line speed of DI5 high speed
pulse sampling, according to the actual
sample pulse number per minute and E0.07,
calculate the line speed value.
1m/Min
22.
d0.22
Current power-on time
Total time of current inverter power-on
Min
23.
d0.23
Current run time
Total time of current inverter run
0.1Min
24.
d0.24
HDI (DI5) impulse
frequency
HDI (DI5) High-speed impulse input
frequency display, unit: 1Hz
1Hz
25.
d0.25
Communication set
value
Frequency, torque or other command values
set by communication port
0.01%
26.
d0.26
Encoder feedback speed
PG feedback speed, to an accuracy of
0.01Hz
0.01Hz
27.
d0.27
Master frequency
display
Frequency set by F0.03 master frequency
setting source
0.01Hz
28.
d0.28
Auxiliary frequency
display
Frequency set by F0.04 auxiliary frequency
setting source
0.01Hz
29.
d0.29
Command torque (%)
Observe the set command torque under the
torque control mode
0.1%
30.
d0.30
Reserved
31.
d0.31
Synchro rotor position
Synchro rotor position angle
0.0°
32.
d0.32
Resolver position
Rotor position when rotary transformer is
used as a speed feedback
-
33.
d0.33
ABZ position
Position information calculated from when
ABZ incremental feedback encoder is
adopted
0
34.
d0.34
Z signal counter
Encoder Z-phase signal count
-
35.
d0.35
Inverter status
Display run, standby and other statuses
-
36.
d0.36
Inverter type
1.G type (constant torque load type)
2.F type (fans/pumps load type)
-
37.
d0.37
AI1 voltage before
correction
Input voltage value before AI1 linear
correction
0.001V
38.
d0.38
AI2 voltage before
correction
Input voltage value before AI2 linear
correction
0.001V
39.
d0.39
AI3 voltage before
correction
Input voltage value before AI3 linear
correction
0.001V
40.
d0.40
Reserved
41.
d0.41
motor temperature
inspection function
PT100 inspect motor temperature value
0°C
