Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 43 / 314

PMW-EX3
2-17
2-2-15. Connector Rear Assembly
1. Refer to Sections from 2-2-1 to 2-2-3, 2-2-5,
2-2-9, 2-2-13 and 2-2-14 and disassemble the
unit up to “CN-3050 board” removal.
2. Disconnect the power supply harness from
the connector (CN2) on the RE-260 board.
3. Remove the screw
a
(B2.6
x
6) and disen-
gage the two claws. Then remove the EMC
bracket (main).
4. Remove the three screws
b
(B2.6 x 6), and
remove the Connector rear assembly.
5. Disconnect the harness from the connector
(CN6) on the CN-3024 board.
6. Disconnect the coaxial cable assembly from
the coaxial connector, and remove the
connector rear assembly.
CN-3024 board
CN6
RE-260 board
CN2
Power supply harness
Coaxial cable
assembly
Coaxial connector
Claws
Connector rear assembly
EMC bracket
(main)
Screws
b
Screw
a
Screws
b
(Silver)
Screws
a
(Silver)
7. Reinstall the removed parts by reversing the
steps of removal.