Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 71 / 314

PMW-EX3
2-45
2-3-4. Handle
Required components
. Gasket (VF): 4-119-228-01 x 1
.
Tape (13
x
50): 4-119-886-01
x
1
. EMC sheet: 4-121-111-01 x 3
Gasket (VF)
EMC sheet,
Tape (13
x 50)
NG OK
1
2 3
Coaxial cable
with connectors
Bundle
Spread
Valley fold
Align the ends. Align the ends.
Tape (13 x 50)
Binding tape
EMC sheet
1 to 3 mm
Procedure
1. Remove the handle assembly. (Refer to
Section 2-2-9.)
2. Spread out the wires of the coaxial cable with
connector so the wires are not overlapped.
Attach the EMC sheet at the position shown
in the illustration.
n
Do not attach the EMC sheet with the wires
of the coaxial cable with connector bundled.
3. Wrap the tape (13 x 50) around the EMC
sheet so the entire EMC sheet that was
attached in step 2 is covered by the tape.
Location of the prevention components