Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 78 / 314

2-52
PMW-EX3
2-4-3. Flexible Flat Cable
Required components
.
Tape (13
x
50): 4-119-886-01
x
3
.
EMC sheet: 4-121-111-01
x
3
EMC sheet,
Tape (13
x 50)
1 2
Flexible flat cable (30 core)
DPR-289A board
EMC sheet
7 to 10 mm
Align the
end surface.
Wrap the tape.
Wrap the tape.
Tape (13 x 50)
Procedure
1. Remove the outside panel sub assembly.
(Refer to Section 2-2-21.)
2. Disconnect the flexible flat cable from the
connector on the DPR-289A board.
3. Attach the EMC sheet at the position shown
in the illustration.
4. Wrap the tape (13 x 50) around the EMC
sheet so the entire EMC sheet that was
attached in step 3 is covered by the tape.
5. Connect the flexible flat cable to the connec-
tor on the DPR-289A board.
6. Assemble the removed parts by reversing
steps of removal. (Refer to Section 2-2-21.)
Location of the prevention components