PMW-EX3
2-27
7.
Place the unit with its inside (left side) facing
toward you. Disconnect the power supply
harness from the connector (CN2) of the RE-
260 board.
8.
Remove the screw. Push the CN-3022 board
and the CN-3023 board in the direction of
arrow
A
, and remove the EX-DD assembly
in the direction of arrow
B
.
9.
Reinstall the removed parts by reversing
steps 5 to 8.
10. Push the extra length of the harness that is
connected to the connector (CN1) on the RE-
260 board, into a clearance between the main
frame and the EX-DD assembly.
11. Connect the coaxial cables with connector to
the two connectors (CN1) on the EC-63
board.
n
Install the coaxial cable with connector in the
way that the yellow wire faces to the bottom.
B
A
M2
x
4
(Silver)
RE-260 board
CN2
CN-3023 board
CN-3022 board
EX-DD assembly
EX-DD assembly
Groove of main frame
EC-63 board
CN1
RE-260 board
CN1
Yellow wire
Bottom side
Coaxial cable
with connectors
12. Reinstall each part by reversing steps 1 to 3.
Содержание XDCAM EX PMW-EX3
