Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 60 / 314

2-34
PMW-EX3
Pad rail
Tape 50
Ferrite core
*
Tapping
BTP2.6
x
6
(Black)
Tapping
BTP2.6 x 6
(Black)
Tapping
BTP2.6 x 6
(Black)
Pad rail
Dowels
Groove of main frame
Protrusion of pad rail
16. Reinstall each part by reversing steps 5 to 6.
17. Attach the ferrite core to the pad rail with the
tape 50.
13. Reinstall the removed parts by reversing
steps 8 to 12.
14. While aligning protrusion and two dowels of
the pad rail with groove of the main frame,
install the pad rail in the main frame and fix it
with the four screws tentatively.
n
When installing the pad rail, attach the screw
with asterisk (
* ) mark shown in the illustra-
tion first.
15. Tighten the four screws with specified torque.
Tapping BTP2.6 x 6 tightening torque:
60 x 10
-2
±
0.02 N . m (6.0
±
0.2 kgf . cm)
n
When reinstalling the removed tapping screw
again, refer to note of section "2-2. Replace-
ment Procedures."
18. Reinstall each part by reversing steps 1 to 3.