Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 41 / 314

PMW-EX3
2-15
2-2-13. Inside Panel Assembly
1. Refer to Sections from 2-2-1 to 2-2-3, 2-2-5
and 2-2-9, and disassemble the unit up to
“Handle Assembly” removal.
2. Remove the two connector covers from the
connectors.
3. Disconnect the HN-344 board connector
(CN100) from the AU-318 board connector
(CN4) that is located in the bottom of the unit
by skewer.
4. Remove the five screws (silver) and the
screw (black). Disengage the six protrusions
of the inside panel from the corresponding six
dowels.
Connector covers
M2 x 4
(Silver)
M2
x
4 (Black)
M2
x
4
(Silver)
Dowel
Inside panel assembly
Protrusion of
inside panel
Connector
HN-344 board
CN100
AU-318 board
CN4
Inside panel
assembly
B
A
Inside panel assembly
Holes of inside panel assembly
Connectors
HN-337 board
CN2
ASW-66 board
CN101
8 Reinstall the removed parts by reversing the
steps of removal.
5. Remove the inside panel assembly slightly in
the direction of arrow
A
.
6. Disconnect the six connectors and remove
them through the six holes, and remove the
inside panel assembly in the direction of
arrow
B
.
7. Disconnect the connector (CN2) of the HN-
337 board from the connector (CN101) of the
ASW-66 board, and remove the inside panel
assembly.