Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 37 / 314

PMW-EX3
2-11
2-2-10. Microphone Assembly
1. Refer to Sections 2-2-5, 2-2-6 and 2-2-9, and
remove the “Handle Assembly” removal.
2. Turn the lock lever in the direction of arrow
A
, loosen the two screws of
a
, and remove
the lock lever.
3. Remove the two screws securing the front
bottom cover.
4. While pushing the front bottom cover in the
direction of arrow
B
paying attention not to
damage the three claws, remove the front
bottom cover in the direction of arrow
C
.
5. Remove the two screws, and pull out the
microphone assembly in the direction of
arrow
D
.
A
C
B
D
Microphone
assembly
Claws
Lock lover
Loosen screws of
a
.
a
: Double-point set screw
Front bottom cover
M2
x
4 (Black)
M2 x 4 (Black)
M2 x 4 (Black)
Harness
Harness should not run on top of this area.
6. Reinstall the removed parts by reversing
steps 1 to 5.
n
Arrange the extra length of the harness
coming from the VF slide arm in the direc-
tion shown by the arrow. Confirm that the
harness does not run on top of the area shown
in the illustration.