Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 63 / 314

PMW-EX3
2-37
2-2-32. Lens Mount Block
1. Refer to Sections from 2-2-1 to 2-2-3, 2-2-5,
2-2-9, 2-2-13, 2-2-21, 2-2-24, and from 2-2-
28 to 2-2-31, and disassemble the unit up to
“DPR-289A Board” removal.
2. Disconnect the harness from the connector
(CN7) on the AU-318 board.
3. Remove the four screws, disengage the main
frame block from the two dowels, and
remove the main frame block.
4. When removing the main frame block,
remove the three prism connectors and the
HN-326 board in the direction of the arrow,
and remove the lens mount block.
B2.6 x 6
(Silver)
B2.6 x 6 (Silver)
AU-318 board
CN7
Main frame block
Lens mount block
Prism
connectors
Dowels
HN-326 board
2-2-33. Prism Block Unit
1. Refer to Sections from 2-2-1 to 2-2-3, 2-2-5,
2-2-9, 2-2-13, 2-2-21, 2-2-24, and from 2-2-
28 to 2-2-32, and disassemble the unit up to
“Lens Mount Block” removal.
2. Remove the four screws, and remove the
prism block unit.
M2
x
5 (Black)
Prism block unit
Lens mount block
3. Reinstall the removed parts by reversing the
steps of removal.
5. Reinstall the removed parts by reversing the
steps of removal.