Sony XDCAM EX PMW-EX3, Руководство по обслуживанию

Страница: 28 / 314

2-2
PMW-EX3
2-2-2. Bottom Panel
1. Remove the button battery lid. (Refer to
Section 2-2-1.)
2. Remove the four screws (M2 x 6), and
remove the bracket (tripod).
3. Remove the four screws (M2
x
4), and
remove bottom panel.
3. Reinstall the lithium battery by reversing the
steps of removal.
Battery holder
Lithium battery
Button battery lid
Lithium battery removal
Lithium battery
M2 x 4
(Black)
Bottom panel
Bracket (tripod)
M2 x 4
(Black)
M2 x 6
(Black)
2-2. Replacement Procedures
n
.
When tightening screw, be sure to tighten it with the specified tightening torque.
.
When reinstalling the removed tapping screw again, tighten it with slightly loose torque not to damage the threads of the
component side.
. If the tightening torque is not specified in a specific item, use the tightening torque as specified below.
M2 (
+
) screw: 18
x
10
-2
±
0.02 N
.
m (1.8
±
0.2 kgf
.
cm)
M2.6 ( + ) screw: 53 x 10
-2
±
0.07 N . m (5.3
±
0.7 kgf . cm)
M3 ( + ) screw: 80 x 10 -2
±
0.01 N . m (8.0
±
0.1 kgf . cm)
2-2-1. Lithium Battery
1. Loosen the screw, and remove the button
battery lid.
2. Remove the lithium battery.
4. Reinstall the removed parts by reversing the
steps of removal.