Sony SO-02J, Инструкция по эксплуатации

Страница: 210 / 256

208
Appendix/Index
Operations are not possible when tapping
or pressing keys.
･
Check if the power is turned off.
→
P.39
･ Check if you activate the screen lock. →
P.176
･ When you touch the screen at a right
angle by gloved finger with "Glove mode"
ON, operation may not be performed
well. Use a ball of finger to touch the
screen for operation.
→
P.164
The screen reacts slowly when you tap or
press keys.
･
When large amount of data is saved in the
terminal or transferring large-size data
between the terminal and microSD card,
the reactions on the screen may be
delayed.
The docomo nano UIM card is not
recognized.
･
Check if the docomo nano UIM card is
attached in the right direction.
→
P.31
The clock is not on time.
･
The clock time may become wrong when
the power is turned on for a long time.
Check if "Automatic date & time" and
"Automatic time zone" are ON and turn
the power off and on in a place with
strong radio wave conditions.
→ P.182
The terminal operation is unstable.
･ Instability may be caused by applications
that you installed after purchasing the
terminal. If the symptom is improved
when you boot the terminal in safe mode
(near default state), uninstalling the
installed application may improve the
symptom.
To boot the terminal in safe mode, press
and hold
O
for at least 1 second with
the terminal OFF until XPERIA logo
appears, and then press and hold the
volume down key for a while.
When the power is turned on, press and
hold
O
for at least 1 second
u
Touch
and hold [Power off]
u
Tap [OK] to restart
the terminal in Safe mode.
When safe mode is booted, "Safe mode" is
displayed at the lower left of the screen.
To exit the safe mode, turn power OFF
and then ON.
* Back up necessary data before using safe
mode.
* Some applications or widgets may be erased.
* Safe mode is not a normal booting state. To
use ordinarily, exit the safe mode.
Applications cannot be operated properly
(applications cannot be activated, or
errors occur frequently).
･
Are there any applications being
disabled? Enable disabled applications,
then retry.
→
P.167