Sony SO-02J, Инструкция по эксплуатации

Страница: 214 / 256

212
Appendix/Index
Calls cannot be made from the terminal
connecting to external device such as car
navigation or handsfree device.
･
If calls are made several times when the
other party does not answer or is out of
service, the call to this number may be
disabled. In this case, turn terminal off and
on.
■
External device connection
An external device connected using USB
cable A to C etc. is not recognized.
･
Reconnect the external device.
However, some devices may not be
detected.
■
Map/GPS
Cannot set AUTO-GPS service
information.
･ Check if the battery level is low and AUTO-
GPS function stops.
If AUTO-GPS stops due to "Low-power
operation settings", AUTO-GPS service
information cannot be set. In this case, set
"Low-power operation settings" to "Not
suspend" or charge the battery.
→ P.33,
P.178
･ Check if "AUTO-GPS operation settings" is
marked.
→
P.178
●
No service
･
The terminal is out of service area, or the
received signal is too weak. Move to a
location where radio signal can be
reached.
･
The docomo nano UIM card is not
working properly.
Removing and inserting docomo nano
UIM card may solve the problem.
If the problem persists, try inserting the
docomo nano UIM card into another
terminal. If this works, it is probably the
terminal that is causing the problem. In
this case, contact "Repairs (Inquiries/
Request)" on the last page of this manual
(in Japanese only).
●
Mobile network not available
Install docomo nano UIM card correctly
(P.31), then move to a location where radio
signal reaches.
●
Unknown error. Could not switch to video
call.
This appears when switching to video call is
not available. If the other party's phone is
not compatible with video call or the other
party uses Call waiting, or during voice
guidance play, switching is not available.
Error messages