Sony SO-02J, Инструкция по эксплуатации

Страница: 226 / 256

224
Appendix/Index
*1 It is confirmed that the terminal and all Bluetooth
devices are compliant with Bluetooth standards
designated by Bluetooth SIG, and they are
authenticated. However, procedures may differ or
data transfer may not be possible depending on the
device's characteristics or specifications.
*2 May vary by the signal status and/or whether there
is an interference between communication devices.
*3 Bluetooth standards for Bluetooth device
connection procedure according to the product's
applications.
*4 As for 4-pole headset, complied with CTIA
standards.
･
Continuous stand-by time is an estimate of
the stand-by time when radio signal
reception is normal. Stationary continuous
stand-by time is the estimated average
operation time when radio signal reception is
normal.
In certain circumstances, the stand-by time
may drop to as low as half the time shown
due to the battery charge, function settings,
temperature, or radio signal reception in the
area (no reception or weak).
･
Continuous call time is an estimate of the
operation time for calling when radio signal
reception is normal.
･
A use of the Internet reduces the actual call
(communication)/stand-by time.
Composing messages or activating the
camera or applications also reduces call
(communication)/stand-by time even if you
do not call or use the Internet.
･
Charging time is an estimate of the time
required to charge a completely empty
internal battery. Under low temperature,
charging may require longer time.
Bluetooth Version 4.2
*1
Radio power power class 1
Available
communication
distance
*2
Within approx. 10 m
Supported
profile/
codec
*3
(version)
HFP (1.7), HSP (1.2), OPP
(1.2), SPP (1.2), HID (1.0),
A2DP (1.2) (LDAC/aptX/
SBC), AVRCP (1.3), PBAP
(1.1.1), PAN (PAN-NAP (1.0)/
PANU (1.0)), HOGP (1.0),
MAP (1.2)
Headset
jack Size Diameter 3.5 mm
Pole
*4
5-pole