Sony DVS-7250, Операционное программное обеспечение

Страница: 486 / 542

14-78
Chapter 14 Setup
Setup Relating to Operations From the Control Panel
(OPERATION Menu)
To assign DME registers to buttons
1
If in the SHOTBOX menu “DME” is not selected, press the cursor
movement button (
,
) to select it.
The menu appears as follows.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
CH2 CH1 GLBL
EFF
No.
S. S
No.
BUTTON
No. CH3 CH4
RCALL REGS CHANNEL SELECT
#2
Function key indications in the SHOTBOX menu (with “DME” selected)
2
Press F1 (BUTTON No.) or turn control knob 2 to align the cursor with
the number of the button to be assigned.
3
• To assign a snapshot register, press F2 (S.S No.), then enter the register
number with the numeric keypad.
• To assign a key frame effect register, press F3 (EFF No.), then enter the
register number with the numeric keypad.
4
Press F4 (GLBL) to F8 (CH4) to select the channel used.
Repeat steps 2 to 4 as required, to assign the buttons.
Note
For the same button number, it is not possible to assign different snapshot
register numbers on the switcher and DME. It is also not possible to assign
different key frame effect register numbers.
Setting the recall mode when recalling a key frame register
With “SWITCHER” selected, press F9 (RECALL MODE) to make the
selection.
RECALL: Carry out a recall only.
R & R: After the recall, carry out a rewind.
Carrying out a recall test
With “SWITCHER” selected, press F10 (RECALL).