Sony DVS-7250, Операционное программное обеспечение

Страница: 382 / 542

12-12
Chapter 12 MISC Menu Operations
Color Correction
2
Press one of the following function keys according to the operation you
wish to carry out, turning it on.
F1 (CCR): Toggle on and off the color correction function.
F2 (COPY): Copy the color correction data set on either of the two
channels to the other channel, or swap the color correction data
between the two channels (see page 12-27).
F4 (INPUT): Select input video processing to apply color correction to
the Y, U, and V signals before conversion to the R, G, and B signals
(see page 12-13).
F5 (PRIMARY): Select primary color correction to apply color
correction, including output level adjustments, to the R, G, and B
signals (see page 12-14).
F6 (SECOND): Select secondary color correction to adjust the
luminance, saturation and hue for six colors: red, green, blue, yellow,
cyan, and magenta (see page 12-18).
F7 (RGB CLIP): Adjust the dark clip and white clip values for the R, G,
and B signals (see page 12-20).
F8 (OUTPUT): Select output video processing to convert the color-
corrected R, G, and B signals to the Y, U, and V signals and carry
out gain adjustments, etc. (see page 12-21).
F9 (LUM PROC): Select luminance processing to adjust the video
signal for different sections of the luminance range (see page 12-22).
F10 (YUV CLIP): Select YUV clipping to adjust the clip values for the
luminance and color difference signals (see page 12-26).