Sony DVS-7250, Операционное программное обеспечение

Страница: 471 / 542

Chapter 14 Setup
14-63
To carry out these settings, use the following procedure.
1
In the OPERATION menu, press F5 (OPERAT MODE).
The OPERATION MODE menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
SHIFT
LOCK
OFF
XPT
SHIFT
RIGHT
DSK AUTO
DROP
BUS
TOGGLE
CUSTOM
MODE
KF
MODE
PROGRAM
BUTTON
ON
Function key indications in the OPERATION MODE menu
2
Carry out the operation in the following table to make the required
setting.
Setting Operation
Setting the
background transition
flip-flop mode Press F1 (BUS TOGGLE).
This toggles the setting between ON and OFF.
Setting the
downstream keyer
auto drop function Carry out the following procedure.
1 Press F2 (DSK AUTO DROP).
The DSK AUTO DROP menu appears.
2 Press F1 (DSK1) or F2 (DSK2) according to the
downstream keyer to which the setting applies.
Pressing the button toggles the auto drop function on
and off.
Setting the cross-
point button shift
function Press F3 (XPT SHIFT).
This cycles the setting through OFF, RIGHT and LEFT.
Setting the cross-
point shift button lock/
unlock function Press F4 (SHIFT LOCK).
Pressing the button cycles the setting through OFF, ON
and HOLD.
Setting custom modes Skip to step 3.
Setting the
programmable button
function
(for other than the
ALL button in the
numeric keypad
section) Carry out the following procedure.
1 Press F8 (PROGRAM BUTTON).
The PROGRAMMABLE BUTTON menu appears.
2 Hold down F1 (PROGRAM BUTTON), and from the
flashing programmable buttons, press the desired one.
The selected button name in the list on the screen
changes to reverse video.
3 Either press F8 (FUNC SELECT) or turn knob 3 to align
the cursor with the desired function from the list.
4 Press F6 (SELECT).
This assigns the function selected in step 3 to the
button selected in step 2.
Settings for key frame
operations Press F6 (KF MODE) to display the KEY FRAME MODE
menu, then press F1 (AUTO SAVE) or F2 (EDIT
ENABLE AT OFF).
This toggles the setting between ENBL and DSBL.