Sony DVS-7250, Операционное программное обеспечение

Страница: 331 / 542

Chapter 9 Registers
9-3
Functions Relating to Registers
To carry out operations on registers, you use the REGISTER menu. This
section describes the functions of the REGISTER menu.
Note
You cannot use the REGISTER menu to carry out operations on the
following registers.
• registers storing wipe snapshots and DME wipe snapshots used (stored and
recalled) in the FlexiPad
• registers storing key snapshots used (stored and recalled) in the key control
section
Listing the registers
In the REGISTER menu, select item 1 (EFFECT) to display a list of the key
frame effect registers, and item 2 (SNAPSHOT) to display a list of the
snapshot registers.
For an example register listing, see page 9-5.
Selecting item 3 (ATTRIB EDIT) or item 4 (CONFIG USER) displays the
following information about the snapshot registers.
Registers used: The display shows which registers contain data (“ * ”) and
which are empty (“ – ”).
Attributes: The snapshot registers can have a number of different
attributes, indicated by the following abbreviations.
D: Effect dissolve
T: Auto transition
X: Cross-point disable
1 to 8: GPI output (number refers to GPI port)
For details of the attributes, see the section “Snapshot attributes” (page
7-4).
Write-protect setting: This shows whether the contents of a register can
be overwritten or not. An “L” (for “Locked”) is shown for a register
whose contents connot be overwritten.
Register name: You can use the NAME function to set any desired
register name.