Sony DVS-7250, Операционное программное обеспечение

Страница: 421 / 542

Chapter 14 Setup
14-13
Creating different cross-point assignment tables
To create the data for the five cross-point assignment tables, use the
following procedure.
Note that for the PANEL1 port, you can also make assignments in the XPT
ASSIGN menu (see page 14-53).
1
In the MULTI XPT ASSIGN menu, press one of F6 (1) to F10 (5), to
select the table to which the settings apply.
The XPT ASSIGN menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
SELECT INHIBIT
BUTTON
No.
SOURCE
SELECT
#3
Function key indications in the XPT ASSIGN menu
2
Referring to the section “Carrying out setup relating to assigning input
signals to cross-point buttons” (page 14-53), carry out the assignments.
For the input signal identifiers or the key source signal assignments, use
the separate XPT ASSIGN menu (see page 14-53). It is not possible to
set these in this menu.
Repeat steps
1
and
2
as required to create all of the tables.