Sony DVS-7250, Операционное программное обеспечение

Страница: 309 / 542

Chapter 8 Key Frame Effects
8-21
4
Press one of F1 (ALL) to F5 (USER), to select the sub-register to which
the settings apply.
For example, selecting F2 (M/E-1) allows you to make path settings
separately for the items (KEY 1, KEY 2, WIPE, etc.) on the M/E-1 bank.
To make path settings for the whole M/E-1 bank without separating
items, press F1 (ALL).
Depending on the sub-register selection, different function key
indications appear. For further details, read the following sections.
Basic Path Setting Operations
Settings when F1(ALL) is selected
Setting the path for all banks
Use the following procedure.
1
In the SWER KF PATH menu, press F1 (ALL).
The function key indications change as follows.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
CURVE
USER
LINEAR LINEAR LINEAR
M/E1
LINEAR OFF
M/E2 PGM/PST
XPT
DSBL
HUE
PATH
2
Press one of F1 (M/E1) to F4 (USER) to select the curve path type for
the corresponding bank.
Pressing each of F1 to F4 cycles through the following settings:
OFF: Make no change as the effect proceeds.
STEP: Change stepwise at each key frame. In other words, there is no
interpolation in the interval between key frames.
LINEAR: Interpolate linearly between key frames. This maintains a
constant speed of movement.
S-CURVE: Accelerate and decelerate around each key frame, so that the
speed is maximum at the mid-point between two key frames.
SPLINE: Use a spline curve to provide a smooth interpolation.
(Continued)